Craftsman 113.299142 Owner's Manual download pdf (Page 31)

4. Operate the tilt-lock handle (COUNTERCLOCKWISE)

to loosen the tilt clamp screw.

5. NOTE; Handle is spring loaded for engagement with

screw head -- must be pushed inward for disengagement

whenever necessary to obtain a new grip on screw head.

i • I

CLAMPSCREW

LOCK HANDLE

•1

6. Rotate tilt crank CLOCKWISE a few turns to tilt blade.

Now rotate crank COUNTERCLOCKWISE until it

stops. Blade should now be square with table and

pointer should point to "'0".

TILT CRA NK

f t

If blade IS SQUARE to table;

A. Check pointer

If POINTER DOES NOT point to the "O'" mark on the

bevel scale;

B. Loosen screw and adjust pointer ... using medium

screwdriver.

I, /,g |

I ,./

POINTERAT

"0" POSITION

If blade is NOT SQUARE to table ... the 90 ° LIMIT

STOP must be ADJUSTED.

1. Using a medium size screwdriver, loosen BOTH

setscrews in 90 ° STOP COLLAR.

NOTE: If you can't reach the setscrews, turn the TILT

CRANK slightly.

2. ROTATE the STOP COLLAR moving it all the way to

the end of TILT SCREW. (to the right)

3. TILT blade RIGHT or LEFT . .. checking with your

square until blade is square to table.

4. ROTATE STOP COLLAR moving it to the right until it

stops . .. TIGHTEN the setscrews.

5. Check POINTER. If it DOES NOT point to the "'O "°

mark on the bevel scale ... loosen screw and adjust

pointer.

45 ° STOP COLLAR

TILT

CRANK

STOP COLLAR

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Comments to this Manuals

No comments

Craftsman 113.299142 Owner's Manual Page 31

Comments to this Manuals

Related products and manuals for Power tools Craftsman 113.299142