Craftsman 113.299142 Owner's Manual download pdf (Page 12)

ALIGNING RIP FENCE

The fence should slide easily along the bars and always

remain in alignment (parallel to sawblade and miter gauge

grooves).

The alignment is ,maintained by a spring underneath the

fence which bears against the front guide bar.

To move the fence, loosen the lock handle and grasp the

fence with one hand at the front,

For very close adjustments, grasp the guide bar wi;_h both

hands and move the fence with your thumbs.

Place fence on saw but DO NOT LOCK IT.

Move the REAR END of the fence slightly to the right or

left ... when you release it, the fence should "spring"

back to its original position.

If it does not, the spring pressure must be INCREASED.

1. Loosen the screws.

2. Move Spring slightly toward front of fence.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

Craftsman 113.299142 Owner's Manual Page 12