Craftsman 143.991200 Specifications Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 94
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
29
CHAPTER 5 RECOIL STARTERS
GENERAL INFORMATION
Recoil starters used on vertical shaft Tecumseh engines are top mount horizontal pull style. Horizontal shaft
engines use recoil starters which can be mounted to pull either vertically or horizontally. All recoil starters turn
the engine over by engaging a dog(s) into the starter cup attached to the engine flywheel. All starters are
spring loaded to retract the dog(s) when the engine speed exceeds the turning speed of the starter.
OPERATION
As the starter rope is pulled, the starter pulley rotates on the center pin. The starter dog(s) is pinned or
pocketed in the pulley hub and extend outward when the pulley rotation forces the starter dog(s) to contact the
ears on the retainer. The retainer ears act as a ramp to fully extend the starter dog(s). The fully extended
starter dog(s) locks in contact with notches in the starter cup. When the engine fires and the rotational speed
of the starter cup exceeds the starter pulley, the starter dog(s) disengages from the starter cup. The starter dog
spring(s) returns the starter dog(s) to the disengaged position. When the starter handle is released, the recoil
spring turns the starter pulley in the opposite direction to retract the starter rope.
COMPONENTS
SERVICE
Starter related problems will require the starter to be removed from the engine to diagnose the cause. Visually
inspect the starter dog(s), starter cup, retainer, springs, rope, washers, and the starter pulley for wear or
breakage. Use one of the following procedures that apply to the application to disassemble, repair, and assemble
the starter. Always consult the Tecumseh Master Parts Manual for the correct replacement parts.
ROPE SERVICE
Rope replacement should be done using the correct part number replacement rope or braided rope of the
correct diameter and length. Consult the Tecumseh Master Parts Manual to obtain the correct part number,
length, and size required. Use the following rope chart to convert a numbered rope to a fractional diameter for
bulk rope use. The rope ends should be cauterized by burning with a match and wiping the rope end with a
cloth while hot.
ROPE
HANDLE
WASHER
STARTER DOG
STARTER HOUSING
RETAINER
SPRING &
KEEPER
HOUSING
PULLEY
DOG
CAM DOG
HANDLE
1
CENTER
SCREW
PULLEY AND
REWIND SPRING
ASSY.
2
BRAKE SPRING
RETAINER
DOG SPRING
BRAKE WASHER
DOG SPRING
SPRING PIN
BRAKE SPRING
WASHER
Main Menu
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 93 94

Comments to this Manuals

No comments