Craftsman 143.991200 Specifications download pdf (Page 10)

Polyurethane-Type Filter Element or pre-cleaner

This type of air filter or pre-cleaner can be serviced when restricted with dust or dirt. Wash the filter or pre-

cleaner in a detergent and water solution until all the dirt is removed. Rinse in clear water to remove the

detergent solution. Squeeze the filter or pre-cleaner (do not twist) to remove the excess water. Wrap the filter

or pre-cleaner in a clean cloth and squeeze it (do not twist) until completely dry.

On the polyurethane filter only, re-oil the filter by applying engine oil and squeezing it vigorously to distribute

the oil. Roll the filter in a cloth and squeeze it (do not twist) to remove the excess oil. The pre-cleaner must not

be oiled.

Clean the air cleaner housing and cover being careful not to allow dirt to fall into the carburetor or intake pipe.

Paper -type filter element

Paper type air filter elements can only be serviced by replacement. Do not attempt to clean a paper filter

element. Replacement filters are available at any authorized Tecumseh Service Outlet. Be sure to use new

filter nuts or seals for the air cleaner studs if supplied with the new filter (diag. 5).

Flocked Screen

A flocked screen may be cleaned by blowing compressed air through the screen from the backside. If the

screen cannot be cleaned with this procedure, it should be replaced with a new screen.

FOAM

ELEMENT

FLOCKED SCREEN

AIR CLEANER

BODY

KLEEN-AIRE

ENTRANCE FROM

UNDER BLOWER

HOUSING

COVER

KLEEN-AIRE

ENTRANCE FROM

UNDER BLOWER

HOUSING

COVER

POLYURETHENE

WRAP

PAPER

ELEMENT

AIR CLEANER

BODY

Main Menu

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 93 94

No comments

Craftsman 143.991200 Specifications Page 10