Craftsman 113.290650 Operations Instructions download pdf (Page 40)

USING FEATHERBOARDS

Add 8 inch high flat facing board to the fence, the

full length of the fence.

Use featherboards for all non "thru-sawing"

operations (when sawblade guard must be

removed), Featherboards are used to keep the work

in contact with the fence and the table as shown.

and to stop kickbacks.

Mount featherboards to fence and table as shown.

so that leading edges of featherboards will support

workpiece until cut is complete and the workpiece

has been pushed completely past the cutter

(sawblade, dado head, molding head. etc.) with a

pushstick, as in ripping.

Before starting the operation (switch 'OFF' and

cutter below table surface):

(a) Install featherboards so they exert pressure on

the workpiece: be positive they are secare, and

(b) Make sure by trial that the featherboards will

stop a kickback if one should occur.

Featherboards are not employed during non thru-

sawing operations when using the miter gauge.

Replace the sawblade guard as soon as the non

thru-sawing operation is complete.

"C" CLAMPS

FEATHERBOARD

"C" CLAMPS "C" CLAMPS

WORK SUPPORT

FEATHERBOARI

RECOMMENDED ACCESSORIES

ITEM CAT, NO.

Steel Legs ............................ 9-22235

Steel Stand ........................... 9-22214

Caster Sets ................. 9-22222 or 9-22221

Solid Table Extension ................. 9-29957

7 in Molding Head Set .................. 9-3217

7 in Molding Head Set .................. 9-3218

7 in . Molding Head ..................... 9-3214

MoldingiDado Insert for 7 in.

Dia. Molding or Dado Head ............ 9-29997

Work Light ............................. 9-2480

Work Light ............................. 9-2481

7 in. Dia. Adjustable Dado Head

9-3261 9-3262 -- 9-3263

ITEM CAT. NO.

7 in Dia Dado Head .................... 9-8257

Sanding Wheel ....................... 9-22723

Miter-Gauge Stop Rods ............... 9-29924

Miter-Gauge Hold-Down Clamp ....... 9-29928

Taper Jig ............................... 9-3233

Universal Jig ........................... 9-3235

Power Tool Know How Handbook

Table Saw ............................ 9-2918

Sawdust Collector ..................... 9-29966

Rip Fence Bar ........................ 9-29969

Table Extension ...................... 9-29968

10" Dia. Sawblades with 5/8" Bore . See CatalOg

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Comments to this Manuals

No comments

Craftsman 113.290650 Operations Instructions Page 40

Comments to this Manuals

Related products and manuals for Power tools Craftsman 113.290650