Craftsman 113.290650 Operations Instructions download pdf (Page 16)

3. The rip fence must be PARALLELwith the

sawbladeand miter Gaugegrooves. . . Move

fenceuntil it is alongsideof groove.DONOT

LOCKIT. It shouldbeparallelto groove.If it is

not:

A Loosenthetwo "HexHeadScrews."

53.Holdfencehea(_tightlyagainstbar.., move

endof fencesothatit isparallelwithgroove,

C. Alternatelytightenthescrews.

HEX SCREWS

FENCE HEAD

HEELING ADJUSTMENT or PARALLELISM

OF SAWBLADE TO MITER GAUGE GROOVE

While cutting, the material must move in a straight

line PARALLEL to the SAWBLADE... therefore the

sawblade must be parallel to both the miter gauge

GROOVE ant the RIP FENCE.

If the sawblade IS NOT parallel to the miter gauge

groove, the blade will bind at one end of the cut.

(This is known as "HEELING"). Check the sawblade

as follows.

WARNING -- FOR YOUR OWN SAFETY MAKE

CERTAIN THAT SWITCH IS "OFF" AND POWER

CORD IS REMOVED FROM POWER SOURCE

OUTLET BEFORE CHECKING OR ADJUSTING

SAW.

1. Mark an "x" on one of the teeth which is SET

(bent) to the LEFT.

2. Place the.head of a combination square in the

GROOVE...adjust blade of square so that it just

touches the tip of the MARKED tooth. Lock the

blade of the square.

3. Move square to REAR. rotate blade to see if

MARKED tooth again touches blade of square.

4. If tooth touches square at FRONT and

REAR...sawblade is PARALLEL to MITER

GAUGE GROOVE.

5 If tooth does not touch the same amount.., the

mechanism underneath must be adjusted to

make the blade PARALLEL to GROOVE.

A. Rear trunnion must be moved TOWARD the

combination square if there is a space

between marked tooth and end of square in

step 4.

B, Rear trunnion must be moved AWAYfrom the

square if marked tooth pushes square out of

position in the groove.

FRONT TRUNNIOI_

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments

Craftsman 113.290650 Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for Power tools Craftsman 113.290650