When "Wl DTH OF RIP" is 6 in. and WIDER use your
RIGHT Hand to feed the workpiece until it is clear of
the table.
Use LEFT hand ONLY to guide the
workpiece., do not-FEED the workpiece with the
left hand
OR MORE
/
When "WlDTE OF RIP" is 2in. to 6in. wide USE THE
PUSH STICK to feed the work.
When WIDTH OF RIP is NARROWER than 2 in., the
push etick CANNOT be used because the guard will
interfere... USE the AUXILIARY FENCE/WORK
SUPPORT and PUSH BLOCK.
Attach Auxiliary Fence/Work Support to rip fence
with two "C" clamps.
36
Comments to this Manuals