Craftsman 351.217570 Operator's Manual download pdf (Page 2)

Warranty ......................................... 2

Safety Rules ...................................... 2

Unpacking ....................................... 3

Assembly ...................................... 3-4

Installation ...................................... 4-5

Operation ...................................... 5-9

Maintenance ..................................... 9

Troubleshooting .................................. 10

Parts Illustration and List ........................ 12-15

EspaSol ...................................... 16-27

ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL

If this Craftsman tool fails due to a defect in material or

workmanship within one year from the date of purchase CALL

1-800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR (or

replacement if repair proves impossible).

If this tool is used for commercial or rental purposes, this war-

ranty will apply for only ninety days from the date of purchase.

This warranty applies only while this tool is in the United

States.

This warranty gives you specific legal rights and you may also

have other rights, which vary, from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

WARNING: For your own safety, read all of the instructions

and precautions before operating tool.

CAUTION: Always follow proper operating procedures as

defined in this manual even if you are familiar with use of this

or similar tools. Remember that being careless for even a

fraction of a second can result in severe personal injury.

BE PREPARED FOR JOB

• Wear proper apparel. Do not wear loose clothing, gloves,

neckties, rings, bracelets or other jewelry which may get

caught in moving parts of machine.

• Wear protective hair covering to contain long hair.

• Wear safety shoes with non-slip soles.

• Wear safety glasses complying with United States ANSI

Z87.1. Everyday glasses have only impact resistant lenses.

They are NOT safety glasses.

• Wear face mask or dust mask if operation is dusty.

• Be alert and think clearly. Never operate power tools when

tired, intoxicated or when taking medications that cause

drowsiness.

PREPARE WORK AREA FOR JOB

• Keep work area clean. Cluttered work areas invite accidents.

• Do not use power tools in dangerous environments. Do not

use power tools in damp or wet locations. Do not expose

power tools to rain.

• Work area should be properly lighted.

° Proper electrical receptacle should be available for tool.

Three-prong plug should be plugged directly into properly

grounded, three-prong receptacle.

• Extension cords should have a grounding prong and the three

wires of the extension cord should be of the correct gauge.

• Keep visitors at a safe distance from work area.

° Keep children out of workplace. Make workshop childproof.

Use padlocks, master switches or remove switch keys to

prevent any unintentional use of power tools.

TOOL SHOULD BE MAINTAINED

° Always unplug tool prior to inspection.

• Consult manual for specific maintaining and adjusting

procedures.

• Keep tool lubricated and clean for safest operation.

• Remove adjusting tools. Form habit of checking to see that

adjusting tools are removed before switching machine on.

• Keep all parts in working order. Check to determine that the

guard or other parts will operate properly and perform their

intended function.

• Check for damaged parts. Check for alignment of moving

parts, binding, breakage, mounting and any other condition

that may affect a tool's operation.

• A guard or other part that is damaged should be properly

repaired or replaced. Do not perform makeshift repairs.

(Use parts list provided to order replacement parts.)

KNOW HOW TO USE TOOL

= Use right tool for job. Do not force tool or attachment to do

a job for which it was not designed.

• Disconnect tool when changing belt or abrasive disc.

• Avoid accidental start-up. Make sure that the tool is in the

"OFF" position before plugging in.

• Do not force tool. It will work most efficiently at the rate for

which it was designed.

• Keep hands away from moving parts and sanding surfaces.

• Never leave tool running unattended. Turn the power off

and do not leave tool until it comes to a complete stop.

• Do not overreach. Keep proper footing and balance.

° Never stand on tool. Serious injury could occur if tool is

tipped or if belt or disc are unintentionally contacted.

• Know your tool. Learn the tool's operation, application and

specific limitations.

• Use recommended accessories (refer to page 15). Use of

improper accessories may cause risk of injury to persons.

• Handle the workpiece correctly. Protect hands from possi-

ble injury.

• Turn machine off if it jams. Belt jams when it digs too

deeply into workpiece. (Motor force keeps it stuck in the

work.)

• Support workpiece with miter gauge, belt platen or work

table.

° Maintain V_J'maximum clearance between table and sand-

ing belt or disc.

CAUTION: Think safety! Safety is a combination of operator

common sense and alertness at all times when tool is being

used.

WARNING: Do not attempt to operate tool until it is com-

pletely assembled according to the instructions.

1 2 3 4 5 6 7 ... 27 28

Comments to this Manuals

No comments

Craftsman 351.217570 Operator's Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Craftsman 351.217570