Craftsman 113.241680 Owner's Manual download pdf (Page 24)

WARNIlNG: TO AVOID iNJURY DUE; TO

ACCIDENTAL START. TURN SWITCH "OFF" AND

REMOVE PLUG FROM POWER SOURCE O UTLET.

2, MAKE SURE THE BLADE IS ALL THE WAY UP

AND SQUARE WtTH THE TABLE

3 Posit_on SPREADER SUPPORT on rod until it Js

even w_h the cod of the rod.

BLADE S©UARE

W_TH TABLE

4 Assemble the Zt8 in long setscrews nuts

_ockwashers and washers to the SPREADER

SUPPORT BRACKET and s_ip the nuts into the

slot m tr_e spreader support,

5, Finger tighten ONLY THE HEX NUTS,

6 Lay a piece of fiat straight wood and a square on

saw table and rotate the SPREADER SUPPORT

unti_ the bracket is a_igned with square.

7, MAKE SURE END OF SUPPORT, BRACKET

AND ROD ARE EVEN.., using a 1/8 in_ setscrew

wrench, TIGHTEN THE SET_CREWS ONLY.

ENDS OF SUPPORT

AND BRACKET TO

BE EVEN WITH

END OF ROD

/

TIGHTEN

SETSCREW ONLY

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Comments to this Manuals

No comments