Craftsman 320.27683 Operator's Manual download pdf (Page 7)

Always check the tool for damaged parts before use. Before further

use of the tool, a guard or other part that is damaged should be carefully

checked to determine if it will operate properly and perform its intended

function. Check for misalignment or binding of moving parts, breakage of

parts, and any other condition that may affect the tool's operation. A guard

or other part that is damaged should be properly repaired or replaced at a

Sears Service Center.

• Disconnect the plug from the power source and/or the battery from the

power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools, before use. Many accidents are caused by poorly

maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories, tool bits, etc., in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

A_, WARNING: When using power tools, basic safety precautions should always

be followed to reduce the risk of fire, electric shock, and personal injury.

WARNING: The operation of any tool can result in foreign objects being

propelled into your eyes, resulting in severe eye damage. When operating power

tool, always wear safety goggles or safety glasses with side shields and a full

face shield when needed.

A_, WARNING: If any parts are missing, do not operate the tool until the missing

parts have been replaced. Doing so could result in serious personal injury.

SERVICE SAFETY

• Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

• If any part of this router is missing or should break, bend, or fail in any

way; or should any electrical component fail to perform properly: shut off

the power switch and remove the plug from the power source and have the

missing, damaged, or failed parts replaced before resuming operation.

• Tool service must be performed only at a Sears Parts & Repair Service

Center. Service or maintenance performed by unqualified personnel could

result in a risk of injury.

27683 ManuaLRevised_11-0120 Page 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

No comments

Craftsman 320.27683 Operator's Manual Page 7