Craftsman 316.74556 Operator's Manual download pdf (Page 8)

CARTON CONTENTS

• Trimmer

• Hardware Pack

TOOLS REQUIRED FOR ASSEMBLY

• Large Phillips Screwdriver

ASSEMBLY INFORMATION

To ensure safe and proper operation of your unit, all

parts and hardware you assemble must be tightened

securely.

TO ASSEMBLE AND ADJUST ASSIST HANDLE

1. Place the assist handle between the top and middle

clamp pieces (Fig. 1).

2. While holding these three pieces together, install the four

(4) screws through the top clamp and into middle clamp.

NOTE: The holes in the top and middle clamp will line

up only when assembled correctly.

3. Place the clamps and assist handle over the shaft

housing and onto the bottom clamp.

4. Hold each hex nut in the bottom clamp recess with a

finger. Start the screws with a large Phillips screwdriver.

Do not tighten until you make the handle adjustment.

Assist Handle

5. Slide the assist handle in or out until the arrow/white

line on the decal touches the c!am p assembly (Fig, 2).

6, While holding the unit in the operating position (Fig. 3),

position the assist handle to the location that provides

you the best grip:

7. Tighten the clamp screws evenly, until assist handle

is secure.

Decal

Fig. 2

Shaft Housing

Fig. 1

Middle Handle

C,amp

J Bottom Handle

Clamp

Nuts

Fig. 3

-8-

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

No comments

Craftsman 316.74556 Operator's Manual Page 8