Craftsman 316.74556 Operator's Manual download pdf (Page 9)

INSTALLINGTHECUTTINGATTACHMENTSHIELD Cutting

AttachmentShield

Use the following instructions if the cutting attachment

shield on your unit is not installed.

_b ARNING: Never operate the trimmer without

the cutting attachment shield in place to

prevent serious personal injury.

1. Slide the cutting attachment shield into the shield

mount on the cutting attachment. Align the screw holes

in the shield with the holes in the shield mount (Fig. 4).

2. Place a hex lock nut into one of the three recessed

holes on the top of the cutting attachment shield (Fig 5).

3. Install a screw into the hole from the bottom of the

cutting attachment shield and screw it into the nut

installed in step #2 (Fig 6). Do not tighten.

4. Repeat steps 2 and 3 until all three screws have

been started, then tighten screws securely with an

appropriate screwdriver.

Shield Mount

Cutting Attachment

Fig. 4

(3) Hex Lock Nuts

Top of Lock

Nut

Fig. 5

(3)

Fig. 6

_lndents

-9-

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

No comments

Craftsman 316.74556 Operator's Manual Page 9