Craftsman 113.213850 Owner's Manual download pdf (Page 18)

maintenance

WARNING:, FOR YOUR OWN SAFETY, TURN

SWITCH OFF AND REMOVE PLUG FROM

POWER SOURCE OUTLET BEFORE MAINTAIN-

ING OR LUBRICATING YOUR DRILL PRESS.

Frequently blow out any dust that may accumu-

late inside the motor.

A coat of automobile-type wax applied to the

table and column will help to keep the surfaces

clean.

If the power cord _s worn or cut, or damaged in

any way, have it replaced immediately.

lubrication

All of the BALL BEARINGS are packed with

grease at the factory. They require no further

lubricat ion.

Periodically lubricate the gear and rack table

elevation mechanism, the SPLINES (grooves} in

the spindle, and the RACK (teeth on the quill).

See "Getting to Know Your Drill Press" - p. 12

for diagram.

recommended accessories

Drill Bits ........................... See Catalog

Rotary Planer ............................ 9-2745

Hold-Down and Guide .................... 9-2457

E)rill Press Vises .................... See Catalog

Rotary Table ............................. 9-2495

Drill Press Mortising Kit ................. 9-29503

Circle Cutter 1/4-, 1/2- Shank ...... 9-3645 - 9-3640

Hole Saws up to 21/2 in. dia. max ..... See Catalog

5 Pc. Stop Collar Set ................... 9-67063

Sanding Drums ................... 9-2497 - 9-2498

Buffing Wheels up to 4 in. dia. max.. See Catalog

Polishing Wheel. 11/2" x 1 In ............. 9-64991

Power Tool Know-how Handbooks

Radial Saw ............................ 9-2917

Table Saw ............................. 9-2918

The recommended accessories listed here are

current and were available at the time this

manual was printed.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Craftsman 113.213850 Owner's Manual Page 18