Craftsman 113.206933 Owner's Manual download pdf (Page 2)

general safety instructions for power tools

1. KNOWYOUR POWER TOOL

Readand understand the owner's manual and

labels affixed to the too!. Learn its application

and limitations as we_l as the specific potential

hazards peculiar to this tool.

2. GROUND ALL TOOLS

This tool is equipped with an approved

3-conductor cord and a 3-prong grounding type

plug tofit the proper grounding type receptacle.

he green c0nductor inthe cord is the grounding

wire. Never connect the green wire to a live

terminal.

3. KEEP GUARDS IN PLACE,

in working order, and in proper adjustment and

alignment.

4. REMOVE ADJUSTING KEYS AND WRENCHES

Form habit of checking to see that keys and

adjusting wrenches are removed from tool before

turning it on.

5. KEEP WORK AREA CLEAN

Cluttered areas and benches invite accidents,

Floor must not be slippery dueto wax or sawdust.

6. AVOID DANGEROUS ENVIRONMENT

Don't use power tools in dam p or wet locations or

expose them to rain. Keep work areawell lighted.

Provideadequate surrOunding work space,

7. KEEP CHILDREN AWAY

All visitors should be kept a safe distance from

work area.

8. MAKE WORKSHOP CHILD-PROOF

-- with padlocks, master switches, or by removing

it will do the job better and safer at the rate for

which it was designed.

10. USE RIGHT TOOL

Don't force tool or attachment to do a job it was

not designed for.

11. WEAR PROPER APPAREL

Do not wear loose clothing, gloves neckties o[

ewelry (rings, wrist watches) to get caught in

moving parts. Nonslip footwear is recommended,

Wear protective hair covering to contain tong

hair, Roll long sleeves above the elbow.

12, USE SAFETY GOGGLES (Head Protection)

Wear Safety goggles (must comply with ANSI

Z87,1) at all times. Everyday eyeglasses only

have impact resistant lenses, they are NO1-

safety glasses. Also. use face or dust mask if

cutting operation is dusty, and ear protectors

(plugs or muffs) during extended periods of

operation.

13. SECURE WORK

Use clam ps or a v_seto hold work when practical.

it's safer than using your hand, frees both hands

to operate tool.

14. DON'T OVERREACH

Keep proper footing and balance at alt times.

15. MAINTAIN TOOLS WITH CARE

Keep tools sharp and clean for best and safest

performances, Follow instructions for lubricating

and changing accessories.

16. DISCONNECT TOOLS

before servicing; when changing accessories

such as blades, bits, cutters, etc.

17. AVOID ACCIDENTAL STARTING

Make sure switch is in "OFF" position before

plugging in.

18. USE RECOMMENDED ACCESSORIES

Consult the owner's manual for recommended

accessories. Follow the instructions that accom-

pany the accessories. The use of improper acces-

sories may cause hazards.

19. NEVER STAND ON TOOL

Serious injury could occur if the tool is tipped or

if the cutting tool is accidentally contacted. Do

not store materials above or near the too! such

that it is necessary to stand on the tool to reach

them.

20. CHECK DAMAGED PARTS

Before further use of the tool. a guard or other

part that is damaged should be carefully checked

toensurethat it will operate properly and perform

its intended function. Check for alignment of

moving parts, binding of moving parts, breakage

of parts, mounting, and any other conditions that

may effect its operation. A guard or other part

that is damaged should be properly repaired or

replaced.

21. DIRECTION OF FEED

Feed work into a blade or cutter against the

direction of rotation of the blade or cutter only.

22. NEVER LEAVE TOOL RUNNING UNATTENDED

Turn power off. Don't leave too! until it comes to

a complete stop.

1 2 3 4 5 6 7 ... 31 32

Comments to this Manuals

No comments

Craftsman 113.206933 Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Craftsman 113.206933