Craftsman 113.206933 Owner's Manual download pdf (Page 17)

MOTOR

CORD

e. Plug motor cord into outlet in switch box,

OUTLET

-- i i _1 ii ___

basic jointer-planer operation

POWER

CORD

WARNING: For your own safety, ALWAYS use the hold

down/push blocks when JOINTING wood that is

NARROWER than 3 tn.... or when PLANING wood that is

THINNER than 3 in.

Do not plane, joint or bevel wood shorter than 12 in.

Material this short is more difficult to control while being

cut. S mall pieces of wood can tip over on the tables orinto

, , , i

the cutterhead and can be kicked back toward you.

For your own safety, never operate this tool with the fence

or guards removed.

For best results, take light cuts. For average planing,

jointing, or beveling, a cut between t/32 and t/16 in. deep

will produce the best results.

FEEDING THE WORKPIECE

Hold the board firmly DOWN on both tables and AGAINST

the fence.., keep fingers close together.

Feed the boa rd at a continuous even rate of speed u ntil the

cut is made along the entire length of the board. Any

hesitation or stopping could cause a "step" to be cut on

the edge of the board which would cause the board to ride

up on the outfeed table resulting in a "crooked" edge on

the board.

i1,1 , iiil,,irl

JOINTING WOOD THAT IS WIDER THAN 3 IN.

As the RIGHT hand passe s over the cutterhead, remove

the LEFT hand... CONTINUE feeding while placing the

LEFT hand behind the RIGHT. Continue feeding in this

manner "hand over hand", until the entire length of the

board is cut. Pressure should be applied over the cutter-

head and outfeed table.

DO NOT FEED TOO FAST. A stow steady: rate of feed

produces a smooth accurate cut. Feeding too fast causes

a "rippled" cut,., makes it difficult to guide the workpiece ....

accurately and could be hazardous.

i i iiii iii1,1 i ,HI

PLANING WOOD THAT IS THICKER THAN 3 IN.

SUPPORT LONG WORKPIECES

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Craftsman 113.206933 Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Power tools Craftsman 113.206933