Craftsman 113.221611 Owner's Manual download pdf (Page 24)

AUXILIARYFENCE

Make one using a piece of 3/8 in,. and 3/4 in,

plywood Fasten together with glue and

woodscrews

NOTE: Since the Push Block is used with the

Auxiliary Fence, the 4-3/4 in dimensions must be

held identical on both the pieces.

3/8 PLYWOOD

THIS FACE AND

THIS EDGE MUST

BE PARALLEL

3/'4 PLYWOOD

NOTE: All dimensions in Inches

AUXILIARY FENCE

CROSSCUTTING

CROSSCUTTING is cutting wood across the grain,

at 90_, or square with both the edge and the flat side

of the wood This is done with the miter gauge and

blade angle set at "0". The graduations on the miter

gauge provide accuracy for average woodworking

In some cases where extreme accuracy is required,

when making angle cuts, for example, make a trial

cut and then recheck it with an accurate square, or

protractor.

_f necessary, the miter gauge head can be swiveled

slightly to compensate for any inaccuracy

NOTE: The space between the miter gauge bar and

the groove in the table is held to a minimum during

manufacturing.

WORKPIECE

1 ,

TABLE

For maximum accuracy when using the miter

gauge, always "favor" one side of the groove in the

table In other words, don't move the miter gauge

from side to side while cutting, but keep one side of

the bar riding against one side of the groove

NOTE: Glue a piece of sandpaper to the face of the

miter gauge head, This will hetp prevent the

workpiece from "creeping" while it is being cut.

The miter gauge may be used in either of the

grooves in the table. Make sure locking knob is tight.

When using the miter gauge in the LEFT hand

groove, hold the workpiece firmly against the miter

gauge head with your left hand, and grip the lock

knob with your right

When using the RIGHT hand groove, hold the

workpiece with your right hand and the tock knob

with your left hand.

When cutting tong workpieces, make sure the end is

supported from the floor..

PLYWOOD CLAMPED

TO SAWHORSE

SANDPAPER

LINE FOR CLARITY

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comments to this Manuals

No comments

Craftsman 113.221611 Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for Power tools Craftsman 113.221611