Craftsman 113.221611 Owner's Manual download pdf (Page 18)

2, Installthe SPREADERCLAMP.Placespreader

betweenspreaderclamp and bracket, Move

forwarduntilallthreeareinline,TIGHTENWING

NUTS.

3 Lay a piece of straightflat wood againstthe

sawblade.Insertfoldedpaperbetweenspreader

andstripof wood.

4,MAKESURETHE HEXNUTSUNDERNEATH

ARELOOSE

5 Liftthe antikickbackpawlto clearthewoodand

holdthespreadertightlyagainstthewood,Make

sure the wood is against the saw blade

TIGHTENTHEHEXNUTS,

This will alignthespreaderin themiddleof the

cut (KERF)madeby sawblade

THREE THICKNESSES

OFPAPER SPREADER

WING NUT CLAMP

PIECE OF

STRAIGHT WOOD

HOLD WOOD 1

"IGHTLY AGAINST

BLADE

ACK

HOLD SPREADER

TIGHTLY AGAINST WOOD

BRACKET

ATTACHING RIP FENCE

Apply a coat of paste wax to the top surface and

front ledge of the saw table This will allow the fence

to slide more easily

1 Loosen fence lock knob by turning counter-

clockwise,.

2. Attach fence head by placing head of fence over

front ledge in saw table.,

FENCE LOCK

KNOB

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

No comments

Craftsman 113.221611 Owner's Manual Page 18