Craftsman 41DDZ23C799 Owner's Manual download pdf (Page 8)

ASSEMBLY

INSTALLING THE CUTTING HEAD SHIELD

MODEL NO. 316.74080*

1. Remove the wing nut and washer from the cutting head shield.

2. Insert the short tab (the one without a hole) on the mount

bracket into the slot on the cutting head shield (Fig. 3).

3. Rotate the cutting head shield until the bolt on the cutting head

shield protrudes through the hole on the mount bracket (Fig. 3).

4. Place the washer onto the

bolt (Fig. 4).

. Screw the wing nut onto the bolt until the cutting head shield is

firmly in place (Fig. 4).

WARNING:

To prevent serious personal injury, never

operate the unit without the cutting head shield in place.

Fig. 3

Mount Bracket

Cutting Head

Shield

Fig. 4

Washer

Bolt

Slot

Wing Nut

Tab

Bolt

Hole

INSTALLING THE CUTTING HEAD SHIELD

MODEL NO. 316.74087*

1. Remove the wing nut and washer from the cutting head shield.

2. Insert the short tab (the one without a hole) on the mount

bracket into the slot on the cutting head shield (Fig. 1).

3. Rotate the cutting head shield counterclockwise to align the hole

on the cutting head shield with the hole on the mount bracket

(Fig. 1).

4. Insert the square bolt int

o the hole undern

eath the cutting head

shield (Fig. 2). Push the square bolt through the cutting head

shield and mount bracket.

5. Place the washer onto the square bolt (Fig. 2).

6. Screw the wing nut onto the square bolt until the cutting head

shield is firmly in place (Fig. 2).

Fig. 1

Mount Bracket

Cutting Head

Shield

WARNING:

To prevent serious personal injury, never

operate the unit without the cutting head shield in place.

Fig. 2

Washer

Square Bolt

Slot

Wing Nut

Cutting Head

Shield

Mount Bracket

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Comments to this Manuals

No comments

Craftsman 41DDZ23C799 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Grass trimmers Craftsman 41DDZ23C799