Craftsman 113.221740 Specifications download pdf (Page 22)

Work Feed Devices (continued) ......

, Position the handle in the center of the plywood base.

Fasten them together with glue and wood screws_

IMPORTANT: Make sure the screw heads do not stick

out tram the bottom oi tile base, they must be flush or

recessed° The bottom must be flat and smooth enough to

slide along the auxiliary fence you are now ready to

make.

Auxiliary Fence

Making the base:

. Start with a piece of 3/8 inch plywood at least 5-1/2

inches wide or wider and 16 inches long or longer.

, Cut the piece to shape and size shown:

Making the side:

• Start with a piece of 3/4 inch plywood at least 2-3/8

inches wide or wider and 16 inches long or longer.

= Cut the piece to shape and size shown:

Putting it together:

. Put the pieces together, as shown:

IMPORTANT: Make sure the screw heads do not stick

out from the bottom of the base, they must be flush or

recessed.. The bottom must be Ilat and smooth enough to

rest on the saw table without rocking.

die

"t-3/8" Plywood Base

PUSH BLOCK

318"Thick Plywood

BASE

1 S u ......

i,,,,,,,,_ i, i, I L,,, L i

3t4" Thick Plywood

SIDE

2-3/8"

3/4" Plywood

3/8" Plywood

This Edge and

This Edge Must

Be Parallel

AUXILIARY FENCE

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

No comments

Craftsman 113.221740 Specifications Page 22