Craftsman 351.227240 Specifications download pdf (Page 15)

SYMPTOM CORRECTIVE ACTION

Depth of cut does not match 11Adjust indicator, securely tighten.

depth of scale 2. See =Adjusting Knife Height," page 10.

90° and 45° cuts inaccurate 1. Adjust fence stops. See "AdjustingFence."

2. Clean wood chips from underside of fence.

Table elevation adjusts with

difficulty

Fuzzy grain

Torn grain

POSSIBLE CAUSE S)

1. Indicator not set correctly

2. Knife projection incorrect

1. Fence stops not adjusted properly

2. Fence bottom not even with

ouffeed table due to wood chips

under fence

1. Gibs not adjusted

2. Elevations screws dirty

3. Elevation screws worn

_4.Friction between base and tables

Planing wood with high moisture

1. Too heavy a cut

2. Knives cutting against grain

3. Dull knives

1.Adjust gibs.

2. Clean and lubricate elevation screws.

3. Replace elevation screws.

4. Clean, lubricate.

Remove high moisture content from wood by

drying.

1. Reduce depth of cut.

2. Feed work along grain.

3. Replace or sharpen knives.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Craftsman 351.227240 Specifications Page 15