Craftsman 71.74295 Operator's Manual download pdf (Page 8)

Figure6

2.Insertthemaleendofthepower

handleinterfaceintothefemale

socketintheendoftheextensionpole

makingsurethatitisfirmlyseated.

(seefigure7)Theinterfaceiskeyed

sothatitwillonlygotogetherone

way.Thehandleandpoleshouldgo

togethereasily.Ifyouexperience

resistanceinputtingthemtogether,

checkthatthekeysonthehandleare

properlyalignedwiththeslotsinthe

pole.

Figure8

To attach the saw head to the pole:

1. Twist the lock ring on the pole to the

unlocked position. (see figure 9)

Figure 7

3. Grasp the pote firmly with one hand

and twist the lock ring on the power

handle to the locked position with the

other hand.(see figure 8)

Figure 9

2. Insert the male end of the pole

interface into the female socket in

the end of the saw head making sure

that it is firmly seated. The interface is

keyed so that it will only go together

one way. The pole and saw head

should go together easily. If you

experience resistance in putting them

together, check that the keys on the

pole are properly aligned with the slots

in the saw head.

3. Grasp the saw head firmly with one

hand and twist the lock ring on the pole

to the locked position with the other

hand. (see figure 10)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 40 41

Comments to this Manuals

No comments