UNPACKING
This product requires assembly.
• Carefully remove all parts from the box. Make sure that
all items listed in the packing list are included.
• Inspect the parts carefully to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the acces-
sory.
• If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Item No, Description Qty.
1 Dovetail Template and Base 1
2 Hex Bolt (1/4-20 x 3 in.) 4
3 Nut (1/4-20) 4
4 Spring 4
5 Washer 8
6 Clamp Bar 2
7 Clamping Knob 4
8 5/16 in. Guide Bushing 1
9 7/16 in. Guide Bushing 1
10 Screw (10-32 x 7/8 in. Flat Head) 3
11 Operator's Manual
_ WARNING: If any parts are missing do not operate
this accessory until the missing parts are replaced.
Failure to do so could result in possible serious per-
sonal injury.
A
WARNING: Do not attempt to modify this acces-
sory. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
_IL WARNING: Do not connect router to power supply
until assembly is complete. Failure to comply could
result in accidental starting and possible serious
injury.
ASSEMBLING YOUR DOVETAIL TEMPLATE
See Figure 1.
• Insert hex bolts through holes located at top and front
of dovetail base as shown in figure 1.
• Make sure the bolt head flats are lined up with slots
inside the dovetail base.
• Secure hex bolt with hex nuts supplied.
• Place one spring over each hex bolt.
• Place a washer on top of each spring, then install
clamp bar on top of washer.
NOTE: For proper assembly, be sure to turn each
clamp bar as shown in Figure 1.
• Place a second washer on top and/or end of each
clamp bar.
• Thread a clamping knob onto each hex bolt to secure
washers, clamp bars, and springs.
7\ _7
1\ .......... 3.............. 9 _ 8
.......................... ,o
Fig. 1
TOOLS NEEDED
In addition to the dovetail template and guide bushing,
you will also need a Craftsman Router and a dovetail cut-
ter. Use dovetail cutter Catalog Number 26319 for making
1/4 in. dovetail joints and Catalog Number 26318, 25505
for making 1/2 in. joints.
Comments to this Manuals