Craftsman 315.25791 Operator's Manual download pdf (Page 3)

_L ARNING: read and understand all instructions.

Failure to follow all instructions listed below, may

result in electric shock, fire and/or serious personal

injury.

SAVE THESE INSTRUCTIONS

• Read these instructions and the instructions for

your router thoroughly before using accessory.

• Know your power tool. Read the operator's manual

for your router carefully. Learn the router's app(ications

and limitations as well as the specific potential hazards

related to this tool.

• Always wear safety glasses. Everyday eyeglasses

have only impact-resistant lenses; they are not

safety glasses. Following this rule will reduce the risk

of serious personal injury.

• Always disconnect router from power supply before

making adjustments or adding accessories. Make

sure the switch is off when reconnecting to power sup-

ply.

• Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable liq-

uids, gases, or dust. Power tools create sparks which

may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while

operating a power tool. Distractions can cause you to

lose control.

• Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not

use tool while tired or under the influence of drugs,

alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal

injury.

• Avoid accidental starting. Be sure switch is off

before plugging in. Carrying tools with your finger on

the switch or plugging in tools that have the switch on

invites accidents.

• Do not overreach. Keep proper footing and balance

at all times. Proper footing and balance enab(es better

control of the tool in unexpected situations.

• Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body is unstable and

may lead to loss of control.

• Disconnect the plug from power source before

making any adjustments, changing accessories,

or storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

• Keep the tool and its handle dry, clean and free

from oil and grease. Always use a clean cloth when

cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any strong solvents to clean your

tool. Following this rule will reduce the risk of loss of

control and deterioration of the enclosure plastic.

• Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

• Protect your hearing. Wear hearing protection dur-

ing extended periods of operation, Following this rule

will reduce the risk of serious personal injury.

• Inspect tool cords periodically and, if damaged,

have repaired at your nearest authorized service

center. Constantly stay aware of cord location. Fol-

lowing this rule will reduce the risk of electric shock or

fire.

• Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will op-

erate properly and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and

any other conditions that may affect its opera-

tion. A guard or other part that is damaged should

be properly repaired or replaced by an authorized

service center. Following this rule will reduce the risk

of shock, fire, or serious injury.

• Inspect for and remove all nails from lumber before

using this tool. Following this rule will reduce the risk

of serious personal injury.

• Save these instructions. Refer to them frequently and

use them to instruct others who may use this tool. If

you loan someone this tool, loan them these instruc-

tions also.

_k WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure

to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic particles.

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Craftsman 315.25791 Operator's Manual Page 3

Comments to this Manuals

Related products and manuals for Power tools Craftsman 315.25791