FULL ONE YEAR WARRANTY ON CRAFTSMAN CIRCULAR SAW
If this Craftsman Circular Saw fails to give complete satisfaction within one year from the date of purchase RETURN
IT 'ro THE NEAREST SEARS SERVICE CENTER / DEPARTMENT THROUGHOUT THE UNITED STATES and
Sears will repair it, free of charge,
If this circular saw is used for commercial or rental purposes this warranty applies for only 90 days from the date of
purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SEARS, ROEBUCK AND CO_
DEPT. 817 WA
HOFFMAN ESTATES, IL 60179
INTRODUCTION
DOUBLE INSULATION is a concept in safety, in electric
power tools, which eliminates the need for the usual three
wire grounded power cord and grounded supply system_
Wherever there is electric current in the tool there are two
complete sets of insulation to protect the user_ All exposed
metal parts are isolated from internal metal motor compo -
nents with protecting insulation.
READ ALL INSTRUCTIONS
IMPORTANT - Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For service we suggest you return the tool to your nearest
Sears store for repair. Always use original factory replace-
ment parts when servicing.
RULES FOR SAFE OPERATION
1_ KNOWYOUR POWERTOOL. Read owner's manual
carefully. Learn its applications and limitations as well
as the specific potential hazards related to this tool
2. GUARD AGAINST ELECTRICAL SHOCK BY PRE-
VENTING BODY CONTACT WITH GROUNDED SUR-
FACES. For example; pipes, radiators, ranges, refrig-
erator enclosures.
3.
4.
5_
6v
7_
8_
KEEP GUARDS IN PLACE AND IN WORKING OR-
DER. Never wedge or tie _ower blade guard open_
Check operation of lower blade guard before each use.
Do not use if lower blade guard does not close briskly
over saw blade_ WARNING: IF SAW IS DROPPED,
LOWER BLADE GUARD MAY BE BENT, RESTRICT-
ING FULL RETURN. If lower blade guard becomes
bent or damaged, replace it before reuse.
KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
AVOID DANGEROUS ENVIRONMENT. Don't use
power tools indamp or wet locations or expose to rain.
Keep work area well lit,
KEEP CHILDREN AND VISITORS AWAY. All visitors
should wear safety glasses arrd be kept a safe distance
.
from work area. Do not let visitors contact tool or
extension cord.
Page 2
STORE IDLE TOOLS. When not in use, tools should
be stored in a dry and high or locked-up place - out of
the reach of children.
DON'T FORCETOOL. It will do the job better and safer
at the rate for which it was designed,
USE RIGHT TOOL. Don't force small tool or attach-
ment to do the job of a heavy duty tool, Don't use tool
for purpose not intended - for example - Don't use a
circular saw for cutting tree limbsor Iogs_
10. DRESS PROPERLY. Do not wear loose clothing or
jewelry, They can be caught in moving pads_ Rubber
groves and non-skid footwear are recommended when
working outdoors. Also wear protective hair covering
to contain long hair.
11_ ALWAYS WEAR SAFETY GLASSES. Everyday eye_ (
glasses have only impact-resistant lenses; they are
NOT safety glasses.
12_ PROTECT YOUR LUNGS. Wear a face or dust mask
if the cutting operation is dusty
(46 pages)
(28 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals