Craftsman 315.108241 Owner's Manual download pdf (Page 12)

NTENANCE

GENERAL

Only the parts shown on parts list, page fifteen, are intended

to be repaired or replaced by the customer. All other parts

represent an important part of the double insulation system

and should be serviced only by a qualified Sears service

technician.

Avoid using solvents when cleaning plastic parts Most

plastics are susceptible to various types of commercial

solvents and may be damaged by their use. Use clean cloths

to remove dirt, carbon dust, etc,

When electric tools are used on fiberglass boats, sports cars,

wallboard, spackling compounds, or plaster, it has been

found that they are subject to accelerated wear' and possible

premature failure, as the fiberglass chips and grindings are

highly abrasive to bearings, brushes, commutator, etc

Consequently it is not recommended that this tool be used for

extended work on any fiberglass material, wallboard, spackling

compounds, or plaster During any use on fiberglass it is

extremely important that the tool is cleaned frequently by

blowing with an air jet.

EXTENSION CORDS

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient

amount of high grade lubricant for the life of the unit under

normal operating conditions. Therefore, no further lubrica-

tion is required.

The use of any extension cord will cause some loss of power. To keep the loss to a minimum and to prevent tool overheating,

use an extension cord that is heavy enough to carry the current the tool will draw. Follow the recommended cord sizes on the

chart provided to determine the minimum wire size required in an extension cord

Extension Cord Length

25-50 Feet

50-100 Feet

Wire Gauge Size (A.W.G.)

When working withyour tool outdoors, use an extension cord suitable for outdoor use and so marked. Outdoor use extension

cords are marked with the letters "WA" or} the cord's jacket.

_Keep extension cords away from the cutting area and position the cord so that it will not get caught on lumber,

tools, etc, during cutting.

Extension cords suitable for use with your circular saw are available at your nearest Sears Catalog Order or Retail Store

Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Craftsman 315.108241 Owner's Manual Page 12