Craftsman 139.53644SRT Operations Instructions download pdf (Page 20)

installation Step 9

Electrical Requirements

To reduce the risk of electric shock, your garage

door opener has a grounding type plug with a third

grounding pin. This plug will onlyfit into a grounding

type outlet.

If the plug doesn't fit into the outlet you have,

contact a qualified electrician to install the proper

outlet.

To avoid installation difficulties,

do not run the opener at this time.

To prevent electrocution or fire, installation

and wiring must be in compliance with local

electrical and building codes.

Do NOT use an extension cord, 2-wire adapter,

or change the plug in any way to make it fit

your outlet.

Right Wrong

if permanent wiring is required by your local code, refer to the following procedure:

To make a permanent connection through the

7/8" diameter hole in the top of the opener

(according to local code):

* Remove the opener cover screws and set the

cover aside.

* Remove the attached 3-prong cord.

* Connect the black (line) wire to the screw on the

brass terminal; the white (neutral) wire to the

screw on the silver terminal; and the ground wire

to the green ground screw. The opener must be

grounded.

* Reinstall the cover.

Ground Tab

Green

Ground

Screw

Ground ...... Btack

Wire _ Wire

WhiteWire

Permanent

Wiring

Connections

Wire

To avoid installation difficulties,

do not run the opener at this time.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Comments to this Manuals

No comments

Craftsman 139.53644SRT Operations Instructions Page 20

Comments to this Manuals

Related products and manuals for Garage Door Opener Craftsman 139.53644SRT