Craftsman 139.53644SRT Operations Instructions download pdf (Page 25)

Please read and comply with the warnings and reinforcement instructions on page 24.

They apply to one-piece doors also.

Header Walt

-- Finished Ceiling --

2x4 Support

Header

Bracket

Door

Bracket Placement

of Door

Bracket

Vertical

Centerline of

Garage Door

Horizontal and vertical

reinforcement is needed for

lightweight garage doors

(fiberglass, aluminum, steel,

door with glass panel, etc)

Door

Bracket

Nut _ _ Lock Washer

5/16"-18 _ 5/16"

Top of Door

, (Inside Garage)

__ T°fp?dcge

__'_ Optional

_ Placement

For a door with no

exposed framing or for _1

the optional installation,

use 5/16"x1-1/2" lag

screws (not supplied)

__ Carriage BoIt

5/16"- 18x2-1/2"

* Center the bracket on the top of the door, in line

with the header bracket as shown. Mark holes.

* Drill 5/16" pilot holes and fasten the door bracket

with hardware supplied.

If the door has no exposed framing, drill 3/16" pilot

holes and fasten the bracket with 5/16"x1-1/2" lag

screws (not supplied) to the top of the door.

The door bracket may be installed on the top

edge of the door if required for your installation.

(Refer to the dotted line optional placement

drawing.) Drill 3/16" pilot holes and substitute

5/16"x1-1/2" lag screws (not supplied) to fasten

the bracket to the door.

Hardware Shown Actual Size

Nut 5/16"-18 Lock Washer 5/16"

Carriage BoIt

5/16"-18x2-1/2"

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Comments to this Manuals

No comments

Craftsman 139.53644SRT Operations Instructions Page 25

Comments to this Manuals

Related products and manuals for Garage Door Opener Craftsman 139.53644SRT