ID]=_.'_o_l[e_] [e]__ lie]_I
KNOW YOUR JIGSAW (Fig. 1)
Before attempting to use this jigsaw, familiarize yourself with all its operating
features and safety requirements.
_, WARNING: Do not allow familiarity with your saw to make you careless.
Remember that a careless fraction of a second is sufficient enough to inflict
severe injury.
Fig. 1 Lock On Button On/Off Triger }witch
Variable Speed Dial
Cord
Tool - free Blade Change
Blade Guard
Locking Knob
Edge Guide
Vacuum Adapter
Orbit Control
Lever
Base Plate
Edge Guide
PRODUCT SPECIFICATIONS
Motor 120~60HZ, 4.5A
No-Load Speed 800-3000 (SPM)
Blade stroke 11/16"
Cutting depth: wood 2-1/4" (57mm)
Cutting depth: metal 1/4" (6 mm)
Bevel capacity 0-45 o
Dust extraction 1-1/4"
Cord length 6'
Weight 3.1 Ibs
A_, WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual as well as knowledge of the
project you are attempting. Before use of this product, familiarize yourself with
all operating features and safety rules.
ON/OFF TRIGGER SWITCH
1. Plug your saw's power cord into a standard household power outlet.
2. Start the tool by squeezing the on/off trigger switch (Fig 2).
3. Release the trigger to stop Fig. / _-_J
the tool.
4.
5.
If you press the lock-on
buttons that are located on
the handle while the trigger
switch is depressed, the
switch will be locked in the
operating position.
The lock-on button allows
the operator to keep the
jigsaw's motor running
without continuously
holding the switch. It
is useful when you are
operating the tool for extended periods.
6. To release the lock-on button, press and release the trigger switch.
ADJUSTING THE CUTTING SPEED USING THE VARIABLE-SPEED DIAL
NOTE: Determine the optimum speed for cutting your workpiece by making
a trial cut in a scrap piece of the same material. Experience will help you to
determine the best results for a )articular application. However, as a general
rule, use slower speeds for
harder, denser materials,
and faster speeds for softer
material.
The variable speed feature of
this jigsaw enhances the cutting
performance, and saves the
blade from undue wear.
1. Use the variable speed dial
to adjust the speed of the
blade.
2. Turn the dial to increase or
decrease the speed (Fig3).
Fig. 3
TOOL-FREE BLADE INSTALLATION
The tool-free blade change control allows for the removal and replacement of
17434Manual Revised 09-0727 Page 10 17434Manual Revised 09-0727 Page 11
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals