Craftsman NEXTEC 320.35078 Operator's Manual

2.5 AMP MULTI-TOOLModel No. 320.35078_WARNING: To reduce the risk of injury,read and understand the Operator's manualbefore using this product.•

QUICK-RELEASE LEVERThe quick-release lever allows for tool-less exchange of application tools.VARIABLE=SPEED ADJUSTMENT DiALThe variable-speed dial is

SELECTING THE APPLiCATiON TOOLAPPLiCATiON TOOL MATERIALSSanding Plate andSandpaperCircular Saw BladeCarbide Circular BladeScraper BladeCarbide Triangu

ON/OFF SWITCH (Fig. 2)1. Connect the power cord ofyour multi-tool to a standardhousehold power outlet.2. To turn the tool ON, push theon/off switch fo

LiVE TOOL iNDiCATOR LIGHT(Fig. 5}The live tool indicator light is agreen light located on the backof the tool. This light is always onwhen the multi-t

4. Align the grooves on theapplication tool with the fourraised ribs on the drive shaft.Put the application tool ontothe drive shaft (Figs. 7 and 8).5

SANDPAPER KIT DESCRmPTION(Fig. 11)• 9 pieces sandpaper: 3 eachof 60, 120, and 180 grit.• Always apply to the compatiblesanding plate (supplied withyou

TO iNSTALL THE SANDPAPER(Fig. 12a),_ WARNING: Check that thesanding plate and sandpaper arecorrectly attached. An incorrect orinsecurely fastened appl

CIRCULAR SAW BLADEDESCRiPTiON {Fig° 14}High=speed steel circularcutting blade.Designed for cutting wood,plastic, drywall, non=ferrousmetals, thin shee

2. Push the quick-release leverfully open with your palm toloosen the flange bolt (Fig. 16).Remove the flange bolt.3. Ensure that the inner threadsand

TO iNSTALL THE CARBIDE CIRCULAR BLADEWARNING: Use sharp, undamaged saw blades only. Deformed, blunt sawblades or saw blades that are otherwise damaged

Warranty page 2Safety Symbols pages 4-5Safety Instructions pages 6-8Description pages 9-10Assembly pages 10-11Operation pages 12-25Maintenance page 26

CUTTING GROUT WiTH THECARBIDE CIRCULAR BLADE(Fig. 21)1. Connect the multi-tool to apower source.2. Draw the cutting lines onthe workpiece, if desired.

4. Align the grooves on thescraper blade with the fourraised ribs on the drive shaft;put the scraper onto the driveshaft (Fig. 23).5. With your gloved

CARBIDE TRIANGULAR RASPDESCRIPTION (Fig. 26)Carbide tipped triangulargrout rasp.Designed for grout, masonry,thinset, wood and removal ofhardened adhes

USING THE CARBIDETRIANGLUAR RASP (Fig. 29}1. Connect the multi-tool to apower source.2. Draw the cutting lines onthe workpiece.3. Turn on the tool and

5. With your gloved hand holding the blade, insert and depress the flange boltuntil you hear a click indicating that the flush-cut blade is secured.6.

NOTICE: The multi-tool can be used with the Craftsman accessories below(sold separately):MODEL DESCRIPTION67650 Carbide Circular Blade67651 Circular S

_!_,WARNING: Avoid using solvents when cleaning plastic parts. Most plasticsare susceptible to damage from various types of commercial solvents and ma

2.5A VARIABLE=SPEED MULTI-TOOL MODEL NUMBER 320.35078The Model Number will be found on the Nameplate. Always mention the ModelNumber when ordering par

2.5A VARIABLE=SPEED MULTI-TOOL MODEL NUMBER 320.35078The Model Number will be found on the Nameplate. Always mention the ModelNumber when ordering par

25 3321487000 Right Housing 126 5610024000 Tapping Screw 227 3120234000 Cord Anchorage 128 3126800000 Right Indicator Cover 129 3126796000 Switch Actu

,_, DANGER: People with electronic devices, such as pacemakers, shouldconsult their physician(s) before using this product. Operation of electricalequ

Page30 35078ManuaLRevised_1206i5

35078Manual_Revised_12-0615 Page31

The purpose of safety symbols is to attract your attention to possible dangers.The safety symbols and the explanations with them deserve your carefula

SAVE THESE iNSTRUCTiONSSome of these following symbols may be used on this tool. Please study themand learn their meaning. Proper interpretation of th

GENERAL POWER TOOL SAFETY WARNINGS,_, WARNING: Read and understand all instructions. Failure to follow allinstructions in this Operator's Manual

PERSONAL SAFETY• Stay alert, watch what you are doing and use common sense whenoperating a power tool. Do not use the tool while tired or under theinf

Keep cutting tools sharp and clean. Properly maintained cutting tools withsharp cutting edges are less likely to bind and are easier to control.Use th

KNOW YOUR MULTI=TOOL (Fig. 1}Fig. 1Quick-Release LeverOn/Off SwitchLive ToolIndicator LightVariable-Speed DialDrive ShaftRibs_[ange BoltPRODUCT SEPCIF