Craftsman 320.27669 Operator's Manual download pdf (Page 31)

When using the plunge base to attach the

router to the router table, the bit depth

can be adjusted by turning the depth rod

clockwise or counterclockwise with the

wrench supplied (Fig. 26).

1. Turn off the router.

Fig. 26

Lock the plunge depth locking lever.

Insert the wrench into the adjusting hole

on the tabletop. Turn the depth rod on the

router clockwise with the wrench to move

the collet/nut up or counterclockwise to

move the collet/nut down.

4. When the desired depth of cut is set, tighten

the clamping lever. The precise depth of cut can be measured with a ruler

27669 ManuaLRevised_11 0215 Page 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

No comments

Craftsman 320.27669 Operator's Manual Page 31