Craftsman 315.268350 Operator's Manual download pdf (Page 8)

WARNING: Your router should never be

connected to power supply when you are

assembling parts, making adjustments,

installing or removing cutters, or when not in

use. Disconnecting your router will prevent

accidental starting that could cause sedous

injury.

INSTALLING/REMOVING CUTrERS

See Figures 3, 4, and 5.

• UNPLUG YOUR ROUTER.

WARNING: Failure to unplug your router

could result in accidental starting causing serious

injury.

• Place the posilock spindle lock into lock position. See

Figure 3. Note: If spindle does not lock, turn collet nut

with wrench, applying pressure at the same time to the

spindle lock with your thumb or finger. When lock

mechanism engages with notch in spindle, spindle lock

will slide into lock position.

WARNING: To prevent damage to the

spindle or spindle lock, do not attempt to engage

spindle lock while motor is running. Always allow

motor to come to a complete stop and unplug it

before engaging spindle lock.

• Place router upside down on workbench or lay it face

down on its side in order to gain easy access to collet

nut.

• Place 15/16 in. wrench provided through back of router

base onto collet nut and turn counterclockwise to

loosen, See Figure 4.

WARNING: If you are changing a cutter

immediately after use, be careful not to touch the

cutter or colletwith yourhands or fingers. They will

get burned because of the heat buildup from

cutting.

TO TIGHTEN

COLLET NUT,

SPINDLE LOCK

INDICATOR LIGHT POSILOCK

SPINDLE LOCK

TOLOCK

Fig. 3

CUTTER

COMBINA_ON

WRENCH

COLLET

NUT

TO LOOSEN

COLLET NUT

Fig. 4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments

Craftsman 315.268350 Operator's Manual Page 8

Comments to this Manuals

Related products and manuals for Power tools Craftsman 315.268350