Craftsman 124.34985 Operator's Manual download pdf (Page 5)

ELECTRICAL REQUIREMENTS

POWER SUPPLY AND MOTOR SPECiFiCATiONS

WARNING: To avoid electrical hazards, fire hazards, or damage to the

tool, use proper circuit protection. Use a separate electrical circuit for

your tools. To avoid shock or fire, if power cord is worn or cut, or dam-

aged in any way, have it replaced immediately.

GROUNDING iNSTRUCTiONS

WARNING: This tool must be grounded while in use to protect the op-

erator from electrical shock.

IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding

provides a path of least resistance for electric current and reduces the

risk of electric shock. This tool is equipped with an electric power cord

that contains an equipment-grounding conductor wire and a 3-prong

plug with a grounding pin. The plug MUST be plugged into a matching

receptacle that is properly installed and grounded in accordance with

ALL local codes and ordinances.

DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the recep-

tacle, have the proper receptacle installed by a qualified electrician.

IMPROPER CONNECTION of the power cord can result in risk of elec-

tric shock. If repair or replacement of the electric cord or plug is neces-

sary, DO NOT plug it into an electrical outlet.

CHECK with a qualified electrician or service person if you do not com-

pletely understand the grounding instructions, or if you are not sure the

tool is properly grounded.

COVER OF GRINDED

OUTLET BOX

! : i

WARNING: Improper connection of equipment grounding conductor

can result in the risk of electrical shock. Equipment should be grounded

while in use to protect operator from electrical shock.

- Check with a qualified electrician if you do not understand grounding

instructions or if you are in doubt as to whether the tool is properly

grounded.

- This tool is equipped with an approved cord and a 3-prong grounding

type plug for your protection against shock hazards.

- Grounding plug should be plugged directly into a properly installed

and grounded 3-prong grounding-type receptacle, as shown.

- Do not remove or alter grounding pin in any manner. In the event

of a malfunction or breakdown, grounding provides a path of least

resistance for electrical shock.

WARNING: This Drill Press is for indoor use only. Do not expose to rain

or use in damp locations.

GUIDELINES FOR EXTENSION CORDS

USE PROPER EXTENSION CORD. Make sure your extension cord is

in good condition. When using an extension cord, be sure to use one

heavy enough to carry the current your product will draw. An undersized

cord will cause a drop in line voltage, resulting in loss of power and

cause overheating.

Be sure your extension cord is properly wired and in good condition. Al-

ways replace a damaged extension cord or have it repaired by a quali-

fied person before using it. Protect your extension cords from sharp

objects, excessive heat and damp or wet areas.

1 2 3 4 5 6 7 8 9 10 ... 33 34

Comments to this Manuals

No comments

Craftsman 124.34985 Operator's Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Craftsman 124.34985