Craftsman 315.228310 User Manual download pdf (Page 40)

OPERATION

An optional dado throat plate is required for this

procedure. See the Accessories section of this

manual and check with your nearest Sears Retail

Store. All blades and dado sets must be rated at least

5,000 RPM.

WARNING: Unplug the saw before working

around the blade. Accidental starting could

cause serious injury.

■ Take out the throat plate by loosening the screw.

■ Remove the riving knife and guard assembly.

■ Remove the blade.

■ Mount the dado blade according to the instructions

provided with it.

■ Test the blade nut and blade washer tightness.

■ Install optional dado throat plate.

■ Plug in the saw and follow dado instructions.

Always use pushsticks with dado cuts.

■ When the work is completed, press the switch off

and remove the key.

■ Unplug the saw and reinstall the riving knife and

blade guard.

■ Reverse the first six steps above.

MAKING A DADO CUT

See Figure 53.

DADO CUT

Fig. 53

WARNING: Never put your hands within 3 in. of

the blade when it is on or you could be seriously

hurt.

CRflFTSMRN* TABLE SAW 315.228310

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

No comments

Craftsman 315.228310 User Manual Page 40