Craftsman 315.243150 Owner's Manual download pdf (Page 16)

SQUARING THE SAW BLADE TO THE

FENCE

See Figures 17 - 20. MITER

• Unplug your saw. FENCE

_I, WARNING: Failure to unplug your saw could \

result in accidental starting causing possible

serious personal injury.

• Pull the saw arm all the way down and engage

the lock pin to hold the saw arm in transport

position.

• Loosen the miter lock handle approximately

one-half turn.

• Depress the miter lock plate and rotate the miter

table until the pointer on the control arm is

positioned at 0°.

• Release the miter lock plate and securely tighten

the miter lock handle.

• Lay a framing square flat on the miter table. Place

one leg of the square against the fence. Slide the

other leg of the square against the flat part of saw MITER

blade. FENCE

Note: Make sure that the square contacts the flat

part of the saw blade, not the blade teeth.

• The edge of the square and the saw blade should

be parallel as shown in figure 17.

• If the front or back edge of the saw blade angles

away from the square as shown in figures 18 and

19, adjustments are needed.

• Using the 8 mm hex key provided, loosen the

socket head screws that secure the mounting

bracket to the miter table. See Figure 20.

• Rotate the mounting bracket left or right until the

saw blade is paraflel with the square.

MITER

FENCE

• Retighten the screws securely and recheck the

blade-to-fence alignment.

MITER FRAMING

TABLE SQUARE

VIEWOF BLADENOTSQUAREWITH

FENCE,ADJUSTMENTSAREREQUIRED Fig. 18

BLADE

FRAMING

_ITER SQUARE

TABLE

VIEWOF BLADENOTSQUAREWITH

FENCE,ADJUSTMENTSARE REQUIRED

Fig. 19

8 mm SOCKET

FRAMING

MITER SQUARE

TABLE

VIEWOF BLADE

SQUAREWITHFENCE

BLADE

MITER

LOCK

PLATE

MITER

LOCKHANDLE

Fig. 17

8 mmHEXKEY

WRENCH

MOUNTING

BRACKET

MITER

TABLE

Fig. 20

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Comments to this Manuals

No comments

Craftsman 315.243150 Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Mitre saws Craftsman 315.243150