Craftsman 580.676530 Operations Instructions Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Problem Cause Correction
Pumphas following problems:
failure to producepressure,
erratic pressure, chattering,loss
of pressure, low water volume.
Detergentfails to mix with spray.
1. Low pressure spray tip installed.
2. Water inlet is blocked.
3. Inadequatewater supply.
4. Inlet hose is kinked or leaking.
5. Clogged inlet hose strainer.
6. Water supply is over IO0°F.
7. High pressure hose is blocked or
leaks.
8. Gun leaks.
9. Nozzleis obstructed.
1
i.
2.
Detergent shut-off valve is in the
"Off" position.
High pressure spray tip installed.
1. Replacewith high pressure spray tip.
2. Clearinlet.
3. Provide adequatewater flow.
4. Straighten inlet hose, patch leak.
5. Checkand clean inlet hose strainer.
6. Provide cooler water supply.
7. Clearblocks in high pressure hose or
replace hose.
8. Replacegun.
9. Cleannozzle.
Engineruns geed at no-load but Enginespeed is too slow.
"begs" when lead is added.
Enginewill net start; or starts and
runsrough.
O. Pump is faulty. 10. ContactSears service facility
1. Rotate detergent shut-off valve to "On"
position.
2. Replacewith low pressure spray tip.
Movethrottle control to FASTposition. If
engine still "bogs down", contact Sears
service facility.
1. Dirty air cleaner.
2. Out of fuel.
3. Stale fuel.
4. Spark plug wire not connected to
spark plug.
5. Badspark plug.
6. Water in fuel.
7. Excessivelyrich fuel mixture.
1. Cleanor replace air cleaner.
2. Fill fuel tank.
3. Drain fuel tank; fill with fresh fuel.
4. Connectwire to spark plug.
5. Replacespark plug.
6. Drain fuel tank; fill with fresh fuel.
7. ContactSears service facility.
Engineshutsdownduring Out of fuel. Fill fuel tank.
operation.
Enginelacks power. Dirty air filter. Replaceair filter.
22
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments