Craftsman 12v Owner's Manual download pdf (Page 11)

High Flow Inflator/Deflator

Adaptor

For larger inflatable items, you

may wish to use the High Flow

Inflator/Deflator Adaptor as follows:

1. Connect the screw-on valve to high flow

inflator/deflator adaptor as shown. Twist

the screw-on valve clockwise until it is

securely attached.

2. Choose nozzle to be used to inflate or

deflate. NOTE: The seal ring may be

used with any of the nozzles to prevent

air from leaking out of inflatables with

very large air inlets. Insert nozzle thru

seal ring as shown.

3. The high flow inflator/deflator adaptor

has an “inflation” outlet and “deflation”

outlet. Attach the nozzle to the

preferred outlet. NOTE: “Inflation” and

“Deflation” are marked at outlets.

Inflation Position

Deflation Position

4. Insert nozzle into inflatable and start

inflator.

NOTE: If inflatable is not getting firm

enough, place thumb over the “deflation”

outlet to allow air to go directly into the

inflatable.

WARNING: Risk of Bursting. DO

NOT over-inflate. Keeping thumb over

“Deflation” outlet could cause inflatable

to over-inflate. Use caution when

placing thumb over “Deflation” outlet.

10

1 2 ... 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments