Craftsman EZ3 917.258990 Owner's Manual download pdf (Page 10)

ASSEMBLY

INSTALL MULCHER PLATE

(See Figs. 5 and 6)

• Install two latch hooks to mulcher plate using screw,

washer, lock washer, and weld nut as shown.

NOTE: Pre-assemDle weld nut to latch hook by inserting

weld nut from the top with hook pointing dowrL

o Tighten hardware securely,

° Raise and hold deflector shield in upright position,

o Place front of mulcher plate over front of mower deck

opening and slide into place, as shown.

° Hook front latch into hole on front of mower deck,

• Hook rear latch into hole on back of mower deck

CAUTION: Do not remove discharge

guard from mower. Raise and hold

guard when attaching mulcher plate

and allow it to rest on plate while in

operation.

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place.

Your mower is now ready for discharging or installation of

optional grass catcher accessory_

NOTE: It is not necessary to change blades. The mulcher

blades are designed for discharging and bagging also.

WELD NUT HOOK POINTS

FROM THE TOP DOWN

\ z

LOCK

WASHER

LATCHSCREW HOOK

WELD_,

NUT --

LATCH LOCK

HOOK WASHER

WASHERS

MULCHER

PLATE _SCREW

FIG. 5

LATCH

HOOKS

FIG. 6

/ CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW

TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE

THE BEST PERFORMANCE AND SA TISFA C TION FROM

THIS QUALITY PRODUCT

PLEASE REVIEW THE FOLLOWING CHECKLIST:

,/" All assembly instructions have been completed..

/ No remaining loose parts in carton.

,/ Batteryis ploperly prepared and charged. (Minimum

! hour at 6 amps)

,/ Seat is adjusted comfortably and tightened securely,

7 All tires are property inflated, (For shipping purposes,

the tires were overinfiated at the factory).

v" Be sure mower deck is properly leveled side-to-side/

front-to-rear for best cutting results (Tires must be

properly inflated for leveling)..

,/ Check mower and drive belts. Be sure they are routed

properly around pulleys and inside all belt keepers.

,/ Check wiring. See that all connections ate still secule

and wires are propedy clamped

v" Before driving tractor, be sure freewheel control is in

drive position

WHILE LEARNtNG HOW TO USE YOUR TRACTOR, PA Y

EXTRA ATTENTION TO THE FOLLOWING IMPORTANT

ITEMS.

v' Engine oil is at proper level

v" Fuel tank is filled with fresh, clean, regular' unleaded

gasoline

v' Become familiar with all controls - their location and

function Operate them before you start the engine

v" Be sure brake system is in safe operating condition

,/ It is important Io purge lhe transmission before operat-

ing your tractorfor the first time Follow proper starting

and transm_ssionpurging instructions (See "TO START

ENGINE" and "PURGE TRANSMISSION" in Qoera.

{tonsection of this manual)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comments to this Manuals

No comments

Craftsman EZ3 917.258990 Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Tractor Craftsman EZ3 917.258990