Craftsman 152.241180 Owner's Manual download pdf (Page 3)

GENERAL SAFETY INSTRUCTIONS

Operating a Bench Grinder can be dangerous if safety

and common sense are ignored. The operator must be

familiar with the operation of the tool. Read this manual

to understand this Bench Grinder. DO NOT operate this

Bench Grinder if you do not fully understand the limita-

tions of this tool. DO NOT modify this Bench Grinder in

any way.

ALWAYS WEAR EYE PROTECTION. Any power tool

can throw debris into the eyes during oper-ations,

which could cause severe and permanent eye dam-

age. ALWAYS Wear Safety Goggles (that comply

with ANSI standard Z87.1) when operating power

tools. Safety Goggles are available at Sears Retail

Stores.

BEFORE USING THE BENCH GRINDER

To avoid serious injury and damage to the tool, read

and follow all of the Safety and Operating Instructions

before operating the Bench Grinder.

1. READ the entire Owner's Manual. LEARN how to

use the tool for its intended applications.

GROUND ALL TOOLS. If the tool is supplied with a

3-prong plug, it must be plugged into a 3-contact

electrical receptacle. The 3rd prong is used to

ground the tool and provide protection against

accidental electric shock. DO NOT remove the 3rd

prong. See Grounding Instructions on page 4.

AVOID A DANGEROUS WORKING ENVIRON-

MENT. DO NOT Use electrical tools in a damp

environment or expose them to rain.

DO NOT use electrical tools in the presence of

flammable liquids or gasses

ALWAYS keep the work area clean, well lit, and

organized. DO NOT work in an environment with

floor surfaces that are slippery from debris, grease,

and wax.

KEEP VISITORS AND CHILDREN AWAY. DO NOT

permit people to be in the immediate work area,

especially when the electrical tool is operating.

DO NOT FORCE THE TOOL to perform an opera-

tion for which it was not designed for. It will do a

safer and higher quality job by only performing

operations for which the tool was intended.

WEAR PROPER CLOTHING. DO NOT wear loose

clothing, gloves, neckties, or jewelry. These items

can get caught in the machine during operations

and pull the operator into the moving parts. The

user must wear a protective cover on their hair, if

the hair is long, to prevent it from contacting any

moving parts.

10. WEAR A DUST MASK TO PREVENT INHALING

DANGEROUS DUST OR PARTICLES.

11. ALWAYS UNPLUG THE T(3OL FROM THE ELEC-

TRICAL RECEPTACLE when making adjustments,

changing parts or performing any maintenance.

12. KEEP PROTECTIVE GUARDS IN PLACE AND IN

WORKING ORDER.

13. AVOID ACCIDENTAL STARTING. Make sure that

the power switch is in the "OFF" position before plug-

ging in the power cord to the electrical receptacle.

14. REMOVE ALL MAINTENANCE TOOLS from the

immediate area prior to turning "ON" the Bench

Grinder.

15.

16.

17.

18.

19.

20.

USE ONLY RECOMMENDED ACCESSORIES. Use

of incorrect or improper accessories could cause seri-

ous injury to the operator and cause damage to the

tool. If in doubt, check the instruction manual that

comes with that particular accessory.

NEVER LEAVE A RUNNING TOOL UNATTENDED.

Turn the power switch tothe "OFF" position. DO NOT

leave the tool until it has come to a complete stop.

DO NOT STAND ON A TOOL. Serious injury could

result if the tool tips over or you accidentally contact

the tool.

DO NOT store anything above or near the tool where

anyone might try to stand on the tool to reach it.

MAINTAIN YOUR BALANCE. DO NOT extend your-

self over the tool. Wear oil resistant rubber-soled

shoes. Keep floor clear of debris, grease,

and wax.

MAINTAIN TOOLS WITH CARE. Always keep tools

clean and in good working order. Keep all blades and

toot bits sharp.

SAVE THESE INSTRUCTIONS.

1 2 3 4 5 6 7 8 ... 16 17

Comments to this Manuals

No comments

Craftsman 152.241180 Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Straight grinders Craftsman 152.241180