Craftsman 152.241180 Owner's Manual download pdf (Page 10)

WORK LIGHT (Fig. J)

The Bench Grinder is provided with a Flexible Work

Light to assist in visibility of the workpiece.

The Bench Grinder is NOT provided with a light bulb for

the Flexible Work Light.

To reduce the risk of fire, use a 120 volt, 40 Watt or

less Track Light Bulb, Type R20, medium base or

equivalent (not included). DO NOT use a light bulb that

extends past the end of the light housing.

The Flexible Work Light may be turned "ON" or "OFF"

by using the rotary switch (B) on the top surface of the

housing (A). The switch can be rotated in the clockwise

direction only. See Figure J.

NOTE: The Flexible Work Light can be turned "ON" or

"OFF" even if the Bench Grinder is turned "OFF".

CAUTION: The Flexible Work Light housing will remain

hot for a few minutes after turning it "OFF". Avoid

contact with housing until it is cool.

Fig. J B

PERMANENT MOUNTING (Fig. K)

You should firmly attach the Bench Grinder to a solid

work surface, hardware not included.

Fig. K

If the Bench Grinder is not securely mounted, it will

have the ability to move or tip over during grinding

operations and possibly cause the operators fingers to

contact the grinding wheels.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Craftsman 152.241180 Owner's Manual Page 10