Craftsman CompuCarve 133.217540 Operations Instructions download pdf (Page 140)

139

CarveWright Designer Software Manual

Chapter 16: Uploading

The contents of this chapter highlight the features associated with uploading a project to the memory card.

Topics:

• Upload

• Auto-Jig

• Upload-to-Flash

• Quality Settings

This menu option has been updated since version 1�113

but has for the most part stayed the same� This chapter

is being from written from the 1�132 version software�

Programmer and Memory Card

Once a project has been created it must be uploaded to the memory card to be transferred to the CarveWright/

CompuCarve Woodworking Machine. The two items below are required to complete this process:

Figure 16�1� USB Programmer

The USB Programmer allows the computer to interface to

the memory card. It plugs into any open USB port on the

computer. There are two lights on the programmer. The green

light lets the user know that the Programmer is connected to a

USB port while the red light indicates that the card is in use.

Figure 16�2� CarveWright Memory Card

The Memory Card is required in order

to transfer projects from the Designer

software to the Woodworking Machine and

also holds the rmware needed to operate

the machine.

The memory card only works with the

Machine and Programmer and can not be

accessed through a computer’s explorer

function. It is not a standard PCMCIA

card and can only be purchased through

CarveWright or authorized dealers.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 218 219

No comments

Craftsman CompuCarve 133.217540 Operations Instructions Page 140