could cause your hand to move into the blade.
• Never reach into the cutting path of the blade.
• Blade guide rollers must support the blade when cutting. The rollers must
rest against the back edge of blade. The only cutting operation when
rollers do not support the blade is the scrolling mode. When scrolling the
blade must swivel as it is guided to follow scroll patterns. Always move
the base back and blade guide up and back away from blade in scrolling
mode.
• Always use blades that have the correct size and shape. Blades that do
not match the mounting hardware of the saw will run erratically and will
cause loss of control.
• Always be sure that all adjusting screws and the blade holder are
fastened tightly before making a cut. Loose adjusting screws can cause
the tool to slip and loss of control may result.
_, WARNING: Use of this tool can generate dust containing chemicals known
to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium, from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water.
Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals!
_, WARNING: Use of this tool can generate and/or disburse dust, which may
cause serious and permanent respiratory or other injury. Always use Sears
approved respiratory protection appropriate for the dust exposure. Direct
particles away from face and body.
WARNING: Your jigsaw should never be connected to the power source
when you are assembling parts, making adjustments, installing or removing bits,
cleaning it, or when it is not in use. Disconnecting the saw will prevent accidental
starting, which could cause serious personal injury.
When unpacking the box, do not discard any packing materials until all of the
contents are accounted for:
1. Carefully lift the saw out of the carton and place it on a stable, flat surface.
2. Open the box to locate the following:
• Jigsaw
• Edge guide
• 2 wood-cutting blades
• Hex key
• Operator's manual
3. Inspect the items carefully to make sure that no breakage or damage has
occurred during shipping. If any of the items listed below is damaged
or missing, return the saw to your nearest Sears store or Craftsman
Evolv outlet to have the saw replaced. Carefully remove the tool and any
accessories from the box. Make sure that all items listed in the packing list
are included.
WARNING: If any part is broken or missing, do not attempt to assemble the
saw, plug in the power cord, or operate the saw until the broken or missing part
has been replaced. Failure to do so could result in possible serious injury.
CARTON CONTENTS/LOOSE PARTS (Fig. 1)
Fig. 1 i:'//:!___
,,j......
ECZ i]z:z ;:;
r__.7Z.......... L S__>
......................D.D_Dw._
Jigsaw
Edge guide 1
Wood-cutting blades 2
Hex key 1
17434 Manual Revised 09-0727 Page 917434Manual Revised 09-0727 Page 8
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals