Craftsman 320.28223 Operator's Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
,_ WARNING: Be sure to read and understand all instructions in this manual
before using the jig saw. Failure to follow all instructions may result in hazardous
radiation exposure, electric shock, fire, and/or serious personal injury.
,_ WARNING: Do not attempt to operate this tool until you have thoroughly
read all instructions, safety rules, and warnings. Failure to comply with them can
result in fire, electric shock, or serious personal injury. Save the manual and refer
to it frequently.
SAFETY PRECAUTIONS FOR LASERS
This jig saw has a built-in laser light. The laser is a Class Ilia and emits output
power of a maximum 2.5mW and 650 wavelengths. These lasers do not normally
present an optical hazard. However, do not stare at the beam as this can cause
flash blindness.
The following label is on your tool. It indicates where
the saw emits the laser light. Be aware of the laser
bystanders in the vicinity of use are made aware of the _i_:!_'_io0_:_,:_';;;;;......
dangers of looking directly into the laser.
WARNING: Laser light. Laser radiation. Avoid Direct Eye Exposure. Do
not stare into beam. Only turn laser beam on when the saw is on the workpiece.
Class Ilia laser.
,_ WARNING: Use of controls, adjustments or performance of procedures other
than those specified in this manual may result in hazardous radiation exposure.
,_k WARNING: The use of optical instruments such as, but not limited to,
telescopes or transits to view the laser beam will increase eye hazard.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure
* Do not remove or deface any product labels. Removing product labels
increases the risk of exposure to laser radiation.
= The laser beam can be harmful to the eyes. Always avoid direct eye
exposure. Do not look directly into the laser beam output aperture during
operation. Do not project the laser beam directly into the eyes of others. Turn
laser on only when making cuts.
= Laser enhancing safety glasses are included to enhance the laser beam in
bright light conditions. Do not wear these glasses if they interfere with the
safe operation of this saw.
= The laser on the jig saw is not a toy. Always keep out of the reach of children.
The laser light emitted from this device should never be directed towards any
person for any reason.
28223 Manual_Revised_SO 03S0 Page 5
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments