Craftsman 320.28223 Operator's Manual download pdf (Page 18)

_IL CAUTION: The blade guide

rollers support the blade when

cutting. The blade guide rollers

must rest against the back of

the back edge of the blade. The

ONLY cutting operation where

the blade guide rollers do not

support the blade is when the

saw is in the scrolling mode.

When scrolling, the blade must

swivel as it is guided to follow

the scroll pattern. Always move

the base back and blade guide

rollers up and back away from

the blade when operating in

scrolling mode. (Fig 8a, 8b)

REMOVING THE BLADE

(Fig.7a, 7b)

1. Unplug the saw.

WARNING: Always

unplug saw from the power

source before changing blade

or making any adjustments.

Failure to unplug the saw could

result in accidental starting

which can cause serious

personal injury.

2. Turn the saw upside down

for blade removal.

Fig. 8a

Fig. 8b

Blade guide rollers support the

blade when cutting in all cutting

modes except scrolling

,; ..........................

Blade Blade Guide Rollers

Blade guide rollers up and

back away from blade when

operating in the scrolling mode.

Blade Blade Guide Rollers

3. Lift the tool-less blade change lever up and carefully remove the blade.

28223 Manual_Revised_SO 0310 Page 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

No comments

Craftsman 320.28223 Operator's Manual Page 18