Craftsman 315.798890 User Manual download pdf (Page 9)

CUSTOMER RESPONSIBILITIES

A WARNING: When servicing use only identical

^ Craftsman replacement parts. Use of any other

parts may create a hazard or cause product

damage.

SHARPENING THE CUTTER BLADE

See Figure 10.

■ Allow your hedge trimmer to come to a stop with

the cutter blade and guard positioned as shown in

Figure 10. This will allow clearance for the file

between cutter teeth and guard teeth.

BLADE LUBRICATION

See Figure 11.

Disconnect hedge trimmer from power suppiy.

For easier operation and longer blade life, lubricate

the hedge trimmer blade before and after each use.

Before lubricating, be sure the switch is in the OFF

position and the tool is disconnected from the power

supply. Apply light machine oil along the edge of the

top strap as shown in Figure 11.

Your trimmer should be stopped, disconnected, and

oiled occasionally during use.

an 8 inch smooth round file, 1/4 in. or 7/32 in.

diameter. Be sure to retain the original angle of

tooth when filing.

■ Remove the hedge trimmer from the vise, restart it,

and stop it so that the unsharpened edges of the

blade teeth are exposed.

■ Disconnect the tool and repeat the sharpening

procedure as described above.

LUBRICATION

All of the bearings in this tool are lubricated with a

sufficient amount of high grade lubricant for the life of

the unit under normal operating conditions. Therefore,

no further lubrication is required.

GENERAL

Avoid using solvents when cleaning plastic parts.

Most plastics are susceptible to damage from various

types of commercial solvents and mày be damaged

by their use. Use clean cloths to remove dirt, carbon

dust, etc.

A WARNING: Do not at any time let brake fluids,

gasoline, petroleum-based products, penetrating

oils, etc. come in contact with plastic parts. They

contain chemicals that can damage, weaken, or

destroy plastic.

Only the parts shown on parts list, page 13, are

intended to be repaired or replaced by the customer.

All other parts represent an important part of the

double insulation system and should be serviced only

by a qualified Sears service technician.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Craftsman 315.798890 User Manual Page 9

Comments to this Manuals

Related products and manuals for Power tools Craftsman 315.798890