Craftsman 315.798890 User Manual download pdf (Page 6)

ASSEMBLY

OPERATION

INSTALLING FRONT HANDLE

See Figures 1 and 2.

After removing your hedge trimmer from its carton,

remove the front handle, screw, and lock nut from the

plastic bag. Using aflat blade screwdriver, which is

the only tool needed for assembly, install as follows:

■ Orient front handle so that the side with the molded

slot for lock nut will be located on the left side of

your hedge trimmer. See Figure 1.

■ Place the front handle parallel to the blade guard of

your hedge trimmer, then fit the ears of the front

handle into the handle slots on the motor housing.

FRONT

HANDLE

BLADE GUARD

yy WARNING: Before connecting your hedge

trimmer to power supply source, always check tc

be sure it is not in lock-on position (depress and

release the switch trigger). Failure to do so coulc

result in accidental starting of your trimmer

resulting in possible serious injury. Also, do not

lock the trigger on jobs where your trimmer may

need to be stopped suddenly.

SWITCH

See Figure 3.

Your hedge trimmer is equipped with a LOCK-OFF

BUTTON, that reduces the possibility of accidental

starting.

REAR

HANDLE

KEYED EAR

Note: For your convenience and ease of assembly

one of the ears on front handle has been keyed.

Place your trimmer on a workbench and insert lock

nut into molded slot on left side of front handle.

See Figure 2.

Fig.S

TO TURN YOUR HEDGE TRIMMER ON

■ Slide the lock-off button fonvard (1).

■ Depress and hold the switch trigger (2).

■ Release the iock-off button (3).

Note: The lock-off button is located on top of the

handle. The lock resets each time the switch

trigger is released.

LOCK-ON FEATURE

See Figure 4.

Your hedge trimmer is also equipped with a LOCK-

ON feature, which is convenient when continuous

trimming for extended periods of time is required.

Insert screw from right to left through the front

handle and motor housing. See the arrow shown in

Figure 2.

Tighten screw securely with a flat blade screw

driver.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Craftsman 315.798890 User Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Craftsman 315.798890