Craftsman 135.17241 Operations Instructions download pdf (Page 15)

StraightCutting

1. Once the edge guideis attached,

measure from the edge of the

work,piece to the line of cut,

2. Set edge guide to the same

distance and then securely

tighten the damp screw

(see Fig 15).

Circle Cutting

1. BEFORE attaching the edge guide,

draw a circle and drill a hole in the

center of the circle (see Fig 16),

2. Drill or plunge cut near

the edge of the cirde_

3. Turrroff s_-anddisconnect

plug from the power source.

4. Attach edgeguide to saw with

the edge guide facing up.

5. Place the meta! center point on the

edge guide into the hole in the

center of the circle. In order for the

edge guide to cut a circle, the metal

center point MUST BE in alignment

with saw blade (see Fig. 17),

6. Measure the distance from the

selected hole to the blade;

this distance is equal to the

circle radius.,

7. Insert plug into power source.

8. Hold the saw firmly,squeeze the

trigger switch and slowly

push the saw forward.

NOTE: To make a hole, cut from

insidethe circle;to make wheels

or disc_, cut from the outside,

Cutting Tips

1. ALWAYS cut slowly so the

blade will stay straightin the hole.

2. Place small wedges in the cut

(see Fig.,17) to keep the inner

circle from spreading when you

near the endof the cut.

Rg. 15

Ciarq

Lineof

,, ,.,,,.,

Fig. 16

Metal Center

Width

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments

Craftsman 135.17241 Operations Instructions Page 15

Comments to this Manuals

Related products and manuals for Power tools Craftsman 135.17241