Craftsman 113.225705 Owner's Manual download pdf (Page 13)

On-Off Switch

The On-Off switch has a locking feature. This Feature Is

Intended To Help Prevent Unauthorized And Possible

Hazardous Use By Children And Others.

1. To turn sander "ON" insert key into switch.

NOTE: Key is made of yellow plastic, located in loose

parts bag.

2. Insert finger under switch lever and Pull end of switch

out.

3. To turn sander "OFF". Push lever in.

WARNING: Never leave the sander unattended until !

it has come to a complete stop.

4. To lock switch in "OFF" position, hold switch "IN" with

one hand. Remove key with other hand.

WARNING: For your own safety, always lock the

switch "OFF" when sander is not in use. Remove

key and keep it in a safe place. Also, in the event of

a power failure (all of your lights go out) turn

switch off, remove the key and store it remote from

spindle sander.

, ,,,,,,,,,,,__,,,_,,,_

CAUTION: Before turning switch on, make sure the

drum and sleeve is properly installed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Craftsman 113.225705 Owner's Manual Page 13