Craftsman COMPANION 27812 Operator's Manual

Operator’s ManualCAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product.• WARRANTY•

18OPERATION cont.! Do not hold the chuck body with one hand and use the power of the drill / driver to tighten the ch

20OPERATION cont.! Make sure to insert the accessory bit straight into the chuck jaws. Do not insert the accessory bit in

22OPERATION AS A SCREWDRIVER(Fig. 15)Turn and set the torque clutch collar to the desired torque setting, 1 through 15. Install and tighten the desire

24MAINTENANCETO RETIGHTEN A LOOSE CHUCK (Figs. 18 and 18a)The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may be

26PARTS LISTModel No. 172-10300 9.6 Volt 3/8-IN. VARIABLE SPEED / REVERSIBLECORDLESS DRILL / DRIVER10-4-07 Drill10300-10400PARTS LIST cont.Model

28PARTS LISTModel No. 172-10400 12.0 Volt 3/8-IN. VARIABLE SPEED / REVERSIBLECORDLESS DRILL / DRIVER10-4-07 Drill10300-1040029Model No. 172-10400

3010-4-07 Drill10300-10400NOTES31NOTES

® Registered Trademark / TM Trademark /SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears B

2TABLE OF CONTENTSWarranty……………...…………………………..Page 2 Safety Symbols……...

4 WARNING: BE SURE to read and understand all instructions in this manual before using this drill / driver. Failure to follow all instructions m

6SAFETY INSTRUCTIONS cont.SAFETY SYMBOLS FOR YOUR TOOL V...Volts A...

8SAFETY INSTRUCTIONS cont.SAFETY RULES FOR BATTERY CHARGER STAND/ TRANSFORMER! READ AND UNDERSTAND ALL INSTRUCTIONS. Fai

10SAFETY INSTRUCTIONS cont. 1. Know your drill / driver. Read operator’s manual carefully. Learn the applications and limitations, as well as t

12KNOW YOUR CORDLESS DRILL / DRIVER (Fig. 1)DESCRIPTIONNOTE: Before attempting to use this product, familiarize yourself with all operating features a

14OPERATION FORWARD / REVERSE SELECTOR SWITCH with POWER LOCK-OFF (Fig. 2)! To prevent gear damage, always allow the chuc

16OPERATION cont. 8. The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.