Craftsman FS2000 Owner's Manual download pdf (Page 5)

5 – English

NAILER SAFETY WARNINGS

 Always assume that the tool contains nails. Careless

handling of the nailer can result in unexpected firing of

nails and personal injury.

 Do not point the tool towards yourself or anyone

nearby. Unexpected triggering will discharge the nail

causing an injury.

 Do not actuate the tool unless the tool is placed

firmly against the workpiece. If the tool is not in

contact with the workpiece, the nail may be deflected

away from your target.

 Disconnect the tool from the power source when the

fastener jams in the tool. While removing a jammed

fastener, the tacker may be accidentally activated if it is

plugged in.

 Use caution while removing a jammed nail. The

mechanism may be under compression and the nail

may be forcefully discharged while attempting to free a

jammed condition.

 Do not use this nailer for fastening electrical cables.

It is not designed for electric cable installation and may

damage the insulation of electric cables thereby causing

electric shock or fire hazards.

 Hold power tool by insulated gripping surfaces,

when performing an operation where the nail may

contact hidden wiring. Nails contacting a “live” wire

may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

 Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations, as

well as the specific potential hazards related to this

power tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury.

 Always wear eye protection with side shields

marked to comply with ANSI Z87.1. Everyday glasses

have only impact resistant lenses. They are not safety

glasses. Following this rule will reduce the risk of serious

personal injury.

 Eye protection which conforms to ANSI specifications

and provides protection against flying particles both

from the FRONT and SIDE should ALWAYS be worn by

the operator and others in the work area when loading,

operating or servicing this tool. Eye protection is required

to guard against flying fasteners and debris, which could

cause severe eye injury.

 The employer and/or user must ensure that proper

eye protection is worn. We recommend Wide Vision

Safety Mask for use over eyeglasses or standard safety

glasses that provide protection against flying particles

both from the front and side. Always use eye protection

which is marked to comply with ANSI Z87.1.

 Additional safety protection will be required in

some environments. For example, the working area

may include exposure to noise level which can lead to

hearing damage. The employer and user must ensure

that any necessary hearing protection is provided and

used by the operator and others in the work area. Some

environments will require the use of head protection

equipment. When required, the employer and user must

ensure that head protection conforming to ANSI Z89.1-

1997 is used.



Keep fingers away from trigger when not driving

fasteners to avoid accidental firing

 Use safety equipment. Always wear eye protection.

Dust mask, nonskid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

 Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

 Protect your hearing. Wear hearing protection during

extended periods of operation. Following this rule will

reduce the risk of serious personal injury.

 Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

 Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and

possibly injury.

 Use the tool only for its intended use. Do not

discharge fasteners into open air.

 Use the tool only for the purpose for which it was

designed.

 Use only the nails recommended for this tool. Use of

the wrong nails could result in poor nail feeding, jammed

nails, and nails leaving the tool at erratic angles. If nails

are not feeding smoothly and properly, discontinue their

use immediately. Jammed and improperly feeding nails

could result in serious personal injury.

 Never use this tool in a manner that could cause a

nail to be directed toward anything other than the

workpiece.

 Do not use the tool as a hammer.

 Always carry the tool by the handle.

 Do not alter or modify this tool from the original

design or function without approval from the

manufacturer.

 Always be aware that misuse and improper handling

of this tool can cause injury to yourself and others.

 Never clamp or tape the trigger or workpiece

contact in an actuated position.

 Never leave tool unattended if the battery is installed.

 Do not operate this tool if it does not contain a

legible warning label.

 Keep the tool and its handle dry, clean and free from

oil and grease. Always use a clean cloth when cleaning.

Never use brake fluids, gasoline, petroleum-based

products, or any strong solvents to clean your tool.

Following this rule will reduce the risk of loss of control

and deterioration of the enclosure plastic.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Craftsman FS2000 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Nail Gun Craftsman FS2000