Craftsman 71 Operator's Manual download pdf (Page 11)

PROBLEM POSSIBLE CAUSE SOLUTION

Strings will not feed when

use as per instructions:

1. Strings have become

stuck together due to heat

or storage time.

2. Not enough string

present in spool.

1. Unplug trimmer. Open spool

retainer. Remove spool, unwind line

and then rewind onto spool housing.

2. Unplug trimmer. Open spool

retainer. Remove spool and replace

with new line or new spool

assembly as per instructions in this

manual.

3. Strings are tangled

on spool

3. Unplug trimmer. Open spool

cover. Remove spool. Unwind and

remove tangled line. Rewind line

as per instructions in this manual.

Grass wraps around drive

shaft housing and string

head.

1. Cutting tall grass at

ground level.

1. Cut tall grass from the top

down to prevent wrapping.

Motor fails to start when

switch trigger is depressed.

1. Power cord is not plugged

in or connection is loose.

2. Household circuit breaker

is tripped.

3. Extension cord may be

faulty.

1. Plug in the power cord.

2. Check circuit breaker.

3. Try another extension cord or

connect into another wall

receptacle socket on a different

circuit.

11 - English

1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments